The International Enamellers Institute

IEI

EN Standards

EN STANDARDS
EN 15282: 2008Vitreous and porcelain enamels – Design of vitreous enamel coated bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
EN 15206: 2007Vitreous and porcelain enamels – Production of specimens for testing enamel on sheet steel, sheet aluminium and cast
EN 13834: 2007Cookware – Ovenware for use in traditional domestic ovens
EN 15159 Part 1: 2006Vitreous and porcelain enamels – Glass lined apparatus for process plant – Part 1: Quality requirements for apparatus, components, appliances and accessories
EN 15159 Part 2: 2006Vitreous and porcelain enamels – Glass lined apparatus for process plant – Part 2: Designation and specification of resistance to chemical attack and thermal shock
EN 15159 Part 3: 2006Vitreous and porcelain enamels – Glass lined apparatus for process plant – Part 3: Guidance on thermal shock resistance
EN 14863: 2005Vitreous and porcelain enamels – Determination of the edge covering on enamelled steel plate to be used in heat exchangers.
EN 14864: 2005Vitreous and porcelain enamels – Enamel coatings applied to steel for writing surfaces – Specification
EN 14866: 2005Vitreous and porcelain enamels – Regenerative, enamelled and packed panels for air-gas and gas- gas heat exchangers – Specifications
EN 14430: 2004Vitreous and porcelain enamels – High voltage test
EN 14431: 2004Vitreous and porcelain enamels – Characteristics of the enamel coating s applied to steel panels intended for architecture
EN 14483: Parts 1: 2004Vitreous and porcelain enamel – Resistance to chemical corrosion – Determination of resistance to chemical corrosion by acids at room temperature
EN 14483: Parts 2: 2004Vitreous and porcelain enamel – Resistance to chemical corrosion – Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
EN 14483: Parts 3: 2004Vitreous and porcelain enamel – Resistance to chemical corrosion – Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
EN 14483: Parts 4: 2004Vitreous and porcelain enamel – Resistance to chemical corrosion – Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
EN 14483: Parts 5: 2004Vitreous and porcelain enamel – Resistance to chemical corrosion – Determination of resistance to chemical corrosion in closed systems
EN 12391-1: 2003Chimneys – Execution standard for metal chimneys – Part 1: Chimneys for non-roomsealed heating appliances
EN 12873-1: 2003Influence of materials on water intended for human consumption – Influence due to migration – Part 1: Test method for non-metallic and non-cementitious factory made products
EN 573-3: 2003Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 3: Chemical composition
EN ISO 15695: 2001Vitreous and porcelain enamels – Determination of scratch resistance of enamel finishes
EN ISO 8289: 2001Vitreous and porcelain enamels – Low voltage test for detecting and locating defects
EN ISO 4535: 2000Vitreous and porcelain enamels – Apparatus for determination of resistance to hot detergent solutions used for washing textiles
EN 12983-1: 2000Cookware – Domestic cookware for use on top of a stove, cooker or hob – Part 1: General requirements
EN 10130: 1999Cold-rolled low carbon steel flat products for cold forming – Technical delivery conditions
EN 1706: 1998Aluminium and aluminium alloys – Castings – Chemical composition and mechanical properties
EN ISO 8290: 1998Vitreous and porcelain enamels – Determination of resistance to sulphuric acid at room temperatures
EN 10111 DD ENV 12874-1: 1998Mechanical dishwashing resistance of domestic utensils – Part 1: Reference test method
EN 1561: 1997Founding – Grey cast iron
EN 1563: 1997Founding – Spheroidal cast iron
EN 851: 1996Aluminium and aluminium alloys – Circle and circle stock for the production of culinary utensils – Specifications
EN 10209: 1996Cold-rolled low carbon steel products for vitreous enamelling – Technical delivery conditions
EN 1388-2: 1996Materials and articles in contact with foodstuffs – Silicate surfaces – Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
EN ISO 1463: 1995Metallic and oxide coatings – Measurement of coating thickness – Microscopical method
EN ISO 2360: 1995Non-conductive coatings on non-magnetic basis metals – measurement of coating thickness – Eddy current method
EN 101: 1991Ceramic tiles: – Determination of scratch hardness of surface according to Mohs.
EN ISO 2178: 1982Metallic and related coatings – Measurement of coating thickness of non-magnetic metallic and vitreous or porcelain enamel coatings on magnetic basis metals: magnetic method
EN 10111Continuously hot-rolled low carbon steel sheet and strip for cold forming – Technical delivery conditions
EN 10149: Part 1Hot-rolled flat products made of high yield strength steels for cold forming – general delivery conditions
%d bloggers like this: